Inhalation Protocol · QY-F Series · Performance & Wellness Centre
H8 Pro™ — Professional Hydrogen System
Engineered for purity, consistency, and commercial reliability.
Performance-grade Multi-User H2 Inhaler. Up to 5,600 ml/min pure H₂ — fully adjustable. Three users. Two control panels.
Hydrogen Wellness™ products are general wellness devices. Not medical devices. No disease or treatment claims are made.
H8 Pro™
Performance hydrogen inhalation — engineered for wellness studios, performance centres and multi-user sessions.
Ships 12–16 business days
From $1,150/month·12-month plan · 0% APR financing available at checkout
Questions before ordering? Send an enquiry →
- Up to 8,400 ml/min total output · up to 5,600 ml/min pure H₂ — fully adjustable
- Three simultaneous users at full output
- Two independent control panels
- 7-stage progressive separation system
- ISO 13485 · CE · FCC · RoHS
Secure Checkout
SSL · PCI
1-Year Warranty
Full cover
Worldwide Delivery
Free, tracked & insured
Human Support
Real specialists
Engineered for 10 years. 10,000 hours of continuous operation.
Every QY-A PEM stack is rated for 10,000 hours — roughly a decade at 45 minutes a day. Backed by a 12-month manufacturer warranty, direct from Hydrogen Machines.
- Rated PEM stack service life10,000 hours (≈10 years at 45 min/day)
- Warranty included12 months, direct from manufacturer
We accept
Built for the studio floor.
Up to 8,400 ml/min H₂ output
Forty per cent more flow than H6 Pro™ — built for back-to-back sessions and protocols that don't pause.
Three-user delivery
Up to three simultaneous users at full output concentration via independent cannula outlets.
Twin control panels
Two operators can run sessions in parallel — independent timers, independent flow monitoring.
99.99% pure hydrogen
SPE/PEM solid-electrolyte separation delivers dry, inhalable H₂ with no caustic chemistry.
7-stage separation
Seven-chamber progressive separation strips moisture upstream — consistently dry gas across the full session.
Continuous-duty rated
1,500 W stack engineered for continuous-duty workloads — back-to-back sessions without thermal throttling.
Studio footprint
Desktop install at 420 × 440 × 590 mm. Drops into wellness studios and performance labs.
Low-noise operation
Engineered for studio acoustics — quiet enough to leave running through a full session.
Global voltage support
AC 100–240 V, 50/60 Hz with stack-protection circuitry. Region-correct plug supplied.
ISO 13485 manufacture
Built under medical-device QMS. Carries CE, FCC, RoHS and ISO 9001 certifications.
7-stage steam & water separation.
Standard hydrogen inhalers use a single cannula water trap. The QY-F series removes moisture at seven progressive stages upstream — delivering consistently dry gas across the full session, including back-to-back use.
Certified. Tested. Documented.
Manufactured under ISO 13485 — the quality management standard of the medical device industry. Full certification documentation is available to professional and institutional buyers on request.
Hydrogen Wellness™ products are general wellness devices marketed under the FDA General Wellness Policy for Low Risk Devices — not medical devices.
Pricing & Value
- Free worldwide delivery on all hydrogen systems.
- Duties prepaid where supported.
- No recurring consumables (no tablets required).
- SPE/PEM electrolysis systems engineered for long-term reliability.
- Warranty shipping included.
- Transparent pricing for all bath and inhalation systems.
See free worldwide shipping & DDP details — Delivery, duties and timeframes.
Technical Benefits
- SPE/PEM electrolysis for high-purity hydrogen output.
- Gas-liquid separation for consistent output quality.
- Industrial-grade components engineered for long service life.
- Reinforced output channels for stable flow rates.
- Low-noise operation suitable for home and professional environments.
- No reactive metals or residue-producing chemistry.
Explore professional & commercial solutions — Specifications for clinics, gyms and studios.
Professional Grade Features
- Industrial-grade SPE/PEM membranes for high-purity output.
- Reinforced internal architecture for continuous commercial operation.
- Gas-liquid separation for stable hydrogen delivery.
- Overheat and overcurrent protection systems.
- Low-noise operation suitable for professional environments.
- Rated PEM stack service life of approximately 10,000 hours.
- Designed for daily use at home and in spas, clinics, hotels and studios.
Commercial Reliability
- Rated PEM stack service life of approximately 10,000 hours.
- Engineered for long-duty-cycle, back-to-back daily operation.
- No consumables, tablets or reactive metals required.
- Overheat and overcurrent protection for unattended session use.
- Stable flow rate and purity across extended run times.
- 12-month warranty with warranty shipping included.
Warranty & 10,000-hour service life — Cover, exclusions and claim process.
Professional Use Cases
- Day spas and wellness centres offering hydrogen inhalation sessions.
- Hotels and resorts adding in-room or spa-suite hydrogen equipment.
- Recovery studios and performance gyms running back-to-back sessions.
- Clinics and practitioner rooms requiring continuous-duty equipment.
- Longevity and members' clubs operating multi-user session schedules.
- Private residences and home studios used daily by multiple people.
Read the hydrogen spa technology brief — How hydrogen bath systems are engineered.
Choosing the right system.
All three systems use the same SPE/PEM membrane platform, the same 10,000-hour rated stack service life, a 12-month warranty and DDP worldwide shipping. The difference is delivery method and throughput.
| Model | Output | Capacity | Best suited to |
|---|---|---|---|
| H6 Pro™ | 6,000 ml/min total gas | Up to 3 simultaneous | Home, private studio, single-practitioner clinics |
| H8 Pro™ — this page | 8,000 ml/min total gas | Up to 3 simultaneous, twin panels | Multi-user studios, recovery rooms, higher throughput |
| Bath One™ | Hydrogen-rich bath water | Whole-bath immersion | Home spa, wellness suites, hydrogen bathing protocols |
Technical specifications.
- Model
- QY-F8400 H8 Pro™
- Hydrogen generation method
- SPE/PEM solid polymer electrolyte electrolysis
- Pure H₂ output
- Up to 5,600 ml/min (fully adjustable)
- Total output (H₂ + O₂)
- 8,400 ml/min
- Hydrogen purity
- 99.99%
- Simultaneous users
- Up to 3
- Dimensions (L × W × H)
- 420 × 440 × 590 mm
- Control panels
- 2 (independent dual-channel)
- Duty cycle
- Continuous-duty rated — 24/7 studio operation
- Gas–liquid separation
- 7-stage progressive steam & water separation
- Membrane
- German PEM / DuPont N115 (SPE/PEM)
- Noise level
- < 45 dB
- Build materials
- ABS/PC composite housing, titanium-platinum electrodes, reinforced silicone gas path
- Input power
- AC 100–240 V, 50/60 Hz (universal)
- Operating temperature
- 0–50 °C
- Water requirement
- Distilled water, TDS < 30
- Certifications
- CE · FCC · RoHS · ISO 9001 (ISO 13485 manufacture)
- Rated PEM stack service life
- 10,000 hours (≈10 years at 45 min/day)
- Warranty
- 12 months, direct from manufacturer
- Included accessories
- Nasal cannulas, three-way Y-adaptor pipes, inhalation tubes, water collector, drain silicone tube, power cord, fuses, manual, certificate of conformity, warranty card
Pricing Transparency
- Transparent pricing for all hydrogen bath and inhalation systems.
- No recurring consumables or tablet purchases required.
- Free worldwide delivery included.
- Duties prepaid where supported.
- Warranty shipping included.
- Long-term cost efficiency compared to tablet-based systems.
Commercial Buyer FAQ
- How does the H8 Pro™ differ from the H6 Pro™?
- The H8 Pro™ is the higher-output SPE/PEM platform, engineered for longer duty cycles and higher-throughput professional environments.
- Does the H8 Pro™ use tablets or consumables?
- No. Hydrogen is generated on demand from distilled water by membrane electrolysis, with no tablets or reactive metals.
- What is the rated service life of the H8 Pro™?
- The PEM stack is engineered for approximately 10,000 hours of operation and is supplied with a 12-month warranty.
- Is the H8 Pro™ suitable for daily commercial use?
- Yes. It is built for continuous, long-duty-cycle operation in clinics, studios and recovery facilities.
- Is shipping included with the H8 Pro™?
- Yes. Free worldwide delivery is included, with duties prepaid in supported destinations.
Compare & buy with confidence
- Compare all systems — H6 Pro™, H8 Pro™ and Bath One™ side by side.
- Professional & commercial solutions — Specifications for spas, clinics, hotels and studios.
- Free worldwide shipping & DDP — Delivery, duties and timeframes.
- Warranty & 10,000-hour service life — Cover, exclusions and claim process.
Hydrogen safety cluster
- Hydrogen tablets: heavy-metal warning — Why reactive-metal chemistry leaves residue behind.
- How hydrogen tablets work — The chemistry, step by step.
- Tablets vs SPE/PEM machines — Cost, purity and consumables compared.
- Tablet residue explained — What remains in the water after dissolution.
Two breathing modes.
Connect the nasal cannula to the H2 outlet for pure hydrogen inhalation, or to the dual H2/O2 outlet for the combined oxy-hydrogen mix. The choice is yours, session by session.
How the QY-F8400 compares.
| Specification | QY-F8400 H8 Pro™ | QY-F6000 H6 Pro™ |
|---|---|---|
| Pure H₂ output | Up to 5,600 ml/min | Up to 4,000 ml/min |
| Total output (H₂+O₂) | 8,400 ml/min | 6,000 ml/min |
| Simultaneous users | 3 | 3 |
| Control panels | 2 (independent) | 1 |
| Continuous-duty rated | ✓ | — |
| Steam & water separation | 7-stage progressive | 7-stage progressive |
| Membrane | German PEM / DuPont N115 | German PEM / DuPont N115 |
| Use case | Shared · multi-bay | Home · shared · multi-user |
| Price (approx) | $13,797 USD | $10,647 USD |
Pricing shown is indicative. Local-currency checkout confirmed at order. No medical or treatment claims are made.
Studio-sized footprint.
The QY-F8400 lands on a 420 × 440 mm deck at 590 mm tall — a desktop install that drops into wellness studios, recovery suites and performance labs without dedicated plant-room space.
Everything in the box.
Every QY-F8400 ships ready-to-run with the full accessory kit — power cord, hydrogen tubing, Y-adaptors, water collector, drain tube, fuses, manual, certificate of conformity and warranty card.
Accessory contents may vary slightly by model. The items listed above are included with all single- and dual-screen hydrogen and oxy-hydrogen machines.
Direct line to engineering.
H8 Pro™ deployments come with a direct line to the Sydney engineering team for configuration, multi-unit integrations, and stack lifecycle planning. Volume pricing, training and installation support are quoted per-site.
- Multi-bay deployment support
- Operator training and on-site commissioning
- Priority replacement stack pricing
- Direct WhatsApp access to the founding team
From the people who made the switch.
Hydrogen Wellness has delivered to customers across six continents — France, Italy, Thailand, Australia, South Africa, Chile — and not one unit has ever been returned.
"I didn't expect to feel the difference the first time. I expected to feel it after a week. I was wrong."
"The machine arrived in France without a single issue. Setup took ten minutes. I've used it every evening since."
"The quality is obvious the moment you take it out of the box. This is not a gadget. It feels like the thing it says it is."
"My evening changed. That is the simplest way I can put it."
Delivered to six continents. Not one unit returned.
Every order tracked and insured door-to-door. Duties prepaid where supported. No surprises at customs.
Ordered today. At your door in 10–14 days.
Free worldwide delivery
All 50 US states · UK · AU · EU · Canada included
Duties & taxes prepaid
The price you see is the price you pay
1-year warranty
Full manufacturer cover
30-day returns
From day of delivery
Direct support
WhatsApp Mon–Fri 9–5 AEST
| Region | Delivery window | Duties |
|---|---|---|
| United Kingdom | 10–14 business days | Duties included |
| United States | 12–16 business days | Duties included |
| Australia | 8–12 business days | Duties included |
| European Union | 10–14 business days | Duties included |
| Canada | 12–16 business days | Duties included |
| New Zealand | 12–16 business days | Duties included |
Ready to order H8 Pro™?
Buy direct. Free worldwide delivery. Duties and taxes included. 1-year warranty. Clinic and multi-unit pricing available on enquiry.
Learn More
Go deeper in the Learning Hub
Premium educational articles from the Hydrogen Wellness Learning Hub — written for owners.
Not sure which system is right for you? Use our Wellness Selector — five short questions, one tailored recommendation.
Related Content
Continue Learning
Explore related guides, products and tools to help you choose the right hydrogen wellness system.
Home Wellness Spaces
Designing a calm, beautiful space at home for hydrogen wellness.
Machine Care
How to care for a hydrogen inhalation machine for years of consistent performance.
Choosing the Right Wellness System
A high-level framework for choosing between inhalation, bathing and water systems.
Inhalation vs Bathing
A side-by-side comparison of the two flagship hydrogen wellness experiences.
Hydrogen Inhalation Machine Buyer's Guide
Output, build, certification and ownership — choosing a premium inhalation machine.
Hydrogen Bath Machine Buyer's Guide
What to look for in a premium hydrogen bath system for the home.
H6 Pro™ Multi-User H2 Inhaler
6,000 ml/min separated H₂ + O₂ inhalation. Up to three cannulas.
Find Your Wellness System
Five short questions — one tailored recommendation across inhalation, bathing and water.
What is the QY-F series — and how does it differ from standard hydrogen inhalers?
A hydrogen inhalation machine uses PEM/SPE (Proton Exchange Membrane / Solid Polymer Electrolyte) electrolysis to split purified water into its component gases …
How does the QY-F series compare to the QY-A series — same manufacturer, different model tier. What specifically is different?
The QY-A series and the QY-F series are produced by the same manufacturer but sit at different tiers of the hydrogen inhalation product line.
QY-F8400 H8 Pro™ Multi-User H2 Inhaler
$13,797
